SZ Stranding Line – Just What Other Companies Are Saying..

How well do you know fiber optic cables? If you don’t have a lot of information about the cables here are some facts that you need to find out about them. Although an FTTH Cable Production Line is manufactured out of glass plus some of its areas require lots of care, a total fiber was created in a way that it’s capable of withstand even the most rugged installations. For instance, cat 5/5e/6/6A has a pulling tension of 25 pounds. There are more optics that can withstand over 200 pounds of pulling tension.

Research research indicates that a fiber optic can withstand higher pulling tension than copper. In addition to this, it’s rated for larger temperature ranges and it is safe from EM/RFI interference.

Fiber Is Much More Secure

Since details are carried inside the cable, the information is more secure than in other cables; therefore, it’s challenging to hack the details. While it’s hard to hack the information inside the cables, it doesn’t imply that they can’t be hacked. It is because all you need to do is to get the network tap and physical access to the cable and it will be possible to hack it.

It’s Easy to Install The Cable

While the cable was difficult to install some time ago, things have changed now as technologies have changed. In order to install the cable you only need to contact installation professionals as well as the cable will likely be installed inside a very limited time.

The Cables Aren’t Affected By Environmental Conditions

Because the fibers carry light, they aren’t disturbed by modifications in temperature, cold, rain or other environmental condition. This is not the case with copper cables which can be usually affected by environmental conditions. For example, when it’s cold, the cables transmit data faster than when it’s hot.

They Support Wireless

The cables are heavily employed by telecommunication companies to hold wireless telephone signals through the towers for the central network. The fibers are preferred by a lot of companies because of the large bandwidth and long lasting compatibility with all the network equipment.

Much like copper cables, NEC (National Electrical Code) requires Optical Fiber Ribbon Machine be marked using their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for its intended use. In accordance with NEC, a building’s inside area is divided into three types of sections: plenums, risers and general purpose areas.

A Plenum area is actually a building space utilized for ventilation or air distribution system. In many buildings, the area above a drop ceiling or within a raised floor is utilized because the air return (source of air) for your air cooling. Those drop ceiling and raised floors are also where fiber cables are often installed. If those cables were burning, they could produce toxic fumes and the fumes will be fed to all of those other building through the air conditioner. As a result, people might be injured even though they are quite a distance from the fire.

Conclusion

These are among the facts that you need to know about optic cables. When buying the units you need to make sure that you get them from authorized dealers. After buying them you ought to ensure that you install them professionally. If you don’t possess the skills you should hire a skilled professional to set up them for you personally. We manufacture different eygmcn of optic fiber cable equipment such as Optical cable sheathing line and lots of other equipment. Go to the given links to know more about us.

When performing fusion splicing you may need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you work with a mechanical splice, you will want stripping tools, mechanical splices, isopropyl alcohol along with a mechanical splice assembly tool. When hand terminating a fiber you will need 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.

Each time a termination is done you must inspect the conclusion face of the connector with Optical Fiber Coloring Machine. Ensuring that light is becoming through either the splice or even the connection, a Visual Fault Locator can be utilized. This piece of equipment will shoot a visible laser on the fiber cable so that you can tell that we now have no breaks or faulty splices. In the event the laser light stops down the fiber somewhere, there is most likely a break in the glass at that time. If you have greater than a dull light showing on the connector point, the termination had not been successful. The light should also go through the fusion splice, if this fails to, stop and re- splice or re-terminate.

Comments are closed.